Gefran模塊R-U16,Gefran授權總代理
意大利杰弗倫Gefran模塊概觀
R-U16模塊有8個光隔離數字輸出,PNP型,24 VDC-3A,可用于向電子設備發送信號和OK,在額定電流限制內直接為VDC供電,或控制任何負載。通過固態繼電器,接觸器等
輸出具有共用的GND端子,分為4組,每組2個輸出,4個獨立電源,每組大容量為,模塊總?cè)萘繛?。
分組創建可由外部設備獨立分段的電路。
每個輸出都具有短路,過載和過熱保護,并具有電流負載和狀態信號LED的電流回路。
R-U16安裝在R-BUS(x)系列的背板上,從該背板接收電源。
描述
多16 2A輸出
所有輸出均具有短路和過載保護功能
診斷LED用于電源,輸出和報警
24 VDC輸出的電源
提供可拆卸連接器
符合UL508
意大利杰弗倫Gefran功能模塊化的根據是,如果一個問題有多個問題組合而成,那么這個組合問題的復雜程度將大于分別考慮這個問題時的復雜程度之和。這個結論使得人們樂于利用功能模塊化方法將復雜的問題分解成許多容易解決的局部問題。功能模塊化方法并不等于無限制地分割軟件,因?yàn)殡S著功能模塊的增多,雖然開發單個功能模塊的工作量減少了,但是設計功能模塊間接口所需的工作量也將增加,而且會出現意想不到的軟件缺陷。因此,只有選擇合適的功能模塊數目才會使整個系統的開發成本小。
Gefran模塊R-U16,Gefran授權總代理
The R-U16 module has 8 optically isolated digital outputs, type PNP, 24 VDC-3A, and can be used to send signals and OKs to electronic devices, directly power loads in VDC within the limits of rated currents, or control loads of any kind via solid state relay, contactors, etc.
The outputs have the GND terminal in common and are divided into 4 groups of 2 outputs with 4 separate power supplies and maximum capacity of per group, 1 total for the module.
Division into groups creates circuits that are independently sectionable by external devices.
Each output is protected against short-circuit, overload, and overheating, and has current recycle circuitry for inductive loads and state signal LEDs.
The R-U16 is installed on the backplanes of the series R-BUS(x) from which it receives its power supply.
Gefran模塊R-U16,Gefran授權總代理